1.Technical parameters of ultraviolet flame monitor
RXZJ-102 UV flame monitor is used for the flame monitoring of gas and fuel industry burners. This monitor is only sensitive to the ultraviolet rays generated, has no response to the high temperature radiation of lights and furnaces, and has strong anti-interference.
Power: 220V ± 10% 5060Hz
Flame monitoring UV sensor
Monitoring response time ≦ 0.2 seconds
Flameout response time 1 ~ 3 seconds
Spectral response range
Sensor and controller connection ≦ 30 meters
Detection target gas, fuel flame
Monitor and UV probe use ambient temperature: -20 ℃ ～ 80 ℃
Volume: 155 × 90 × 55mm
Installation size: 135 × 52mm mounting hole 4-φ5
Probe mounting hole: φ18, ventilated and cooled.
2.Technical parameters of high energy igniter
RXGD-30 high-energy igniter is mainly used for automatic ignition of gas, fuel oil industrial burners and ground torch system. It has the advantages of reliable ignition and long life. The ignition end is resistant to high temperature and coking, and has self-cleaning ability.
Power supply voltage 220V ± 10% 5060HZ
Suitable for fuel gas, light oil, heavy oil
The instantaneous temperature of the ignition end of the ignition rod is 1300 ℃
Spark energy: 30J.
Spark frequency: 6-12 times
400 × 225 × 125mm
Turn the box power switch to the on position, and the power indicator light will be on.
Through the knob on the operation panel of the control box, the remote local ignition function of the system can be switched. The ignition is convenient, the ignition success rate is high, and the operation is stable.
Regardless of local or remote ignition (or when the flame is extinguished and re-ignited), the furnace must be purged before the ignition (ready indicator light is on), and there must be no combustible gas in the furnace before ignition, otherwise it will cause explosion and other safety accident .
☆ Local ignition mode: Turn the knob to the local place, the local indicator light is on, and after the ready indicator light is on, you can start or stop the ignition monitoring system through the button on the control panel operation panel. And remote control instructions, local instructions, ignition instructions, 1, 2 # ignition instructions, 1, 2 # flameout instructions, and the ignition signal, 1, 2 # ignition signals, 1, 2 # flameout signals are displayed on the control box panel. The switch value is uploaded to the upstream DCS centralized control center for real-time monitoring.
☆ Remote ignition mode: Turn the knob to the remote, the remote indicator light is on, wait for the ready indicator light, then you can remote DCS drive (switching long drive signal), remote start or stop the ignition monitoring system with one touch. And remote control instructions, local instructions, ignition instructions, 1, 2 # ignition instructions, 1, 2 # flameout instructions, and the ignition signal, 1, 2 # ignition signals, 1, 2 # flameout signals are displayed on the control box panel. The switch value is uploaded to the upstream DCS centralized control center for real-time monitoring.
Ignition equipment: can reach 100% ignition success rate , can withstand high temperature of 1300 ℃, more stable performance
Fire detection equipment: research and development process to improve the reliability of equipment operation and the accuracy of detection to ensure the safety of operations
Combustion control system: more energy-efficient than traditional design, for the purpose of optimizing the combustion efficiency of the boiler , environmental protection and emission reduction
Plant 1200 square meters, 100+ production staff, to meet customer demand
With an annual output of 5,000 units, the production capacity is higher than its peers, and it can meet the needs of large orders at any time.
Complete equipment, the introduction of domestic and foreign equipment production lines, fully automated production
Free customized solutions , more suitable product recommendations
According to the actual situation of customers, provide on- site guidance installation service to make the product operate normally
24-hour online customer service, timely collect and feedback customer questions , answer questions
Xi'an Ranxin Thermal Energy Engineering Technology Co., Ltd., located in Xi'an, is a high-tech company engaged in the design, development, production, sales, installation and commissioning of electronic ignition equipment, flame detection equipment, and automatic control systems for ignition and combustion processes .