1.Technical parameters of ultraviolet flame monitor
RXZJ-102 ultraviolet flame monitor is used for the flame monitoring of gas and fuel industry burners. The monitor is only sensitive to the generated ultraviolet rays, has no response to lights and high temperature radiation in the furnace, and has strong anti-interference.
Power: 220V ± 10% 50 / 60Hz
Flame monitoring UV sensor
Monitoring response time ≦ 0.2 seconds
Spectral response range 190 / 280nm
Sensor and controller connection ≦ 30 meters
Detection object gas, fuel flame
Monitor and UV probe use ambient temperature: -20 ℃ ～ 80 ℃
Volume: 155 × 90 × 55mm
Installation size: 135 × 52mm mounting hole 4-φ5
Probe mounting hole: φ18, ventilated and cooled.
2.Technical parameters of high energy igniter
RXGD-12 high-energy igniter is mainly used for automatic ignition of gas, fuel oil industrial burners, and ground torch system. It has the advantages of reliable ignition and long life.
Power supply voltage 220V ± 10% 50 / 60HZ
Suitable for fuel gas, light oil, heavy oil
The instantaneous temperature of the ignition end of the ignition rod is 1300 ℃
Spark energy: 12J.
Spark frequency: 6-12 times / second
Metal case volume 240 × 175 × 105mm
Turn the box power switch to the on position, and the power indicator light is on.
The knob on the operation panel of the control box can realize the remote / local ignition function conversion of the system. The ignition is convenient, the ignition success rate is high, and the operation is stable.
Regardless of local or remote ignition (or when the flame is extinguished and re-ignited), the furnace must be purged before the ignition (the ready indicator light is on), and there should be no combustible gas in the furnace before ignition, otherwise it will cause a safety accident such as explosion .
☆, Local ignition mode: Turn the knob to the local position, the local indicator light is on, and after waiting for the ready indicator light, you can use the knob on the control panel operation panel to perform manual single-step ignition, valve opening, flameout, etc. And display remote indication, local indication, ignition indication, ignition indication, valve opening indication, fault indication on the control box panel and upload the valve position opening and closing signal and ignition signal, ignition signal, alarm signal to the upstream in the form of switching value. DCS centralized control center performs real-time monitoring.
☆ Remote ignition mode: Turn the knob to the remote, the remote indicator light is on, wait for the ready indicator light, then you can remote DCS drive (switching long drive signal) for remote one-button ignition operation. And display remote indication, local indication, ignition indication, ignition indication, valve opening indication, fault indication on the control box panel and upload the valve position opening and closing signal and ignition signal, ignition signal, alarm signal to the upstream in the form of switching value. DCS centralized control center performs real-time monitoring.
Ignition equipment: up to 100% ignition success rate , can withstand high temperature of 1300 ℃, more stable performance
Fire detection equipment: research and development process to improve the reliability of equipment operation and the accuracy of detection to ensure the safety of operations
Combustion control system: more energy efficient than traditional design, for the purpose of optimizing the combustion efficiency of the boiler , environmental protection and emission reduction
Plant of 1200 square meters, 100+ production staff, to meet customer demand for urgent orders
With an annual output of 5,000 units, the production capacity is higher than peers, and it can meet the needs of large orders at any time.
Complete equipment, the introduction of domestic and foreign equipment production lines, fully automated production
Free customized solutions , more suitable product recommendations
According to the actual situation of customers, provide on- site guidance and installation services to make the product operate normally
24-hour online customer service, timely collect and feedback customer questions , answer questions
Xi'an Ranxin Thermal Energy Engineering Technology Co., Ltd., located in Xi'an, is a high-tech company engaged in the design, development, production, sales, installation and commissioning of electronic ignition equipment, flame detection equipment, and automatic control systems for ignition and combustion processes .