1. Battery: 12VDC 4.5Ah
2. Charging time: ≥4h
3. Accumulated continuous ignition time (battery is fully charged): ≥2h
4. Ignition energy: 12J
5. Spark discharge frequency 6 ～ 12 times / s
6. Dimensions: 250mm × 140mm × 135mm
7. Special ignition cable: can be customized according to user requirements
8. Ignition rod: The material of the front end of the ignition rod is 2520 superalloy, the highest instantaneous temperature is 1300 ℃, the outer diameter of the conventional ignition rod
Φ16, the outer diameter, length, and connection method of the ignition rod in special cases can be customized according to user requirements.
There are three indicators on the panel:
1. Ignition indicator: real-time indication of ignition
2. Charging indicator: Lights when connected to a smart charger for charging
3. Low-power indicator: On when the internal battery voltage is too low during the ignition process
In addition, there are high-voltage output connectors, smart charger sockets, ignition twist switch
1. Correctly connect the portable high-energy igniter, high-voltage cable and ignition gun, otherwise high-voltage leakage and ignition may occur, causing damage to people and equipment.
2. Set the ignition switch to the ignition position, the ignition device starts to work, and the ignition indicator flashes to indicate ignition.
3. After the ignition is completed, set the ignition switch to the ignition off position. At this time, you can connect the smart charger through the charging socket to charge, and the charging indicator lights up; when the indicator of the smart charger changes from red to green, the battery inside the machine will Sufficient.
1. Before the ignition, make sure that the furnace has been purged without residual flammable gas. Prevents accidents such as deflagration when starting ignition.
2. When igniting, the ignition device should be turned on first, and then injected with fuel (gas) to ignite.
3. When the igniter is used for fuel ignition, the fuel should be atomized well. If the atomization quality is too poor, the ignition success rate will be affected. After the ignition is completed, the ignition rod must be manually exited from the flame combustion area using a propeller or manually to ensure the life of the ignition rod.
4. When the fuel is ignited during ignition, the igniter is turned off to avoid burnout of internal components caused by continuous ignition for a long time.
5. Do not drop the ignition rod when installing and using it, to prevent the insulation porcelain of the ignition rod from cracking, causing high voltage leakage, no ignition, etc., which seriously affects the safety and normal operation of the equipment.
1. The portable high-energy igniter is equipped with a dedicated 12VDC 4.5Ah high-energy rechargeable battery, which is equipped with a dedicated charger.
2. After use, charge it in time. When charging, the charger plug is connected to the charging socket on the panel. The charging lamp is on to indicate that charging is in progress, and the charging time is not less than 4 hours. When it is not used for a long time, it should be stored after being fully charged, and it should be charged every three months during storage.
Note: Under any circumstances, customers are not recommended to open the igniter box by themselves. If there is any abnormal situation, please contact our after-sales technical staff.
Ignition equipment: up to 100% ignition success rate , can withstand high temperature of 1300 ℃, more stable performance
Fire detection equipment: research and development process to improve the reliability of equipment operation and the accuracy of detection to ensure the safety of operations
Combustion control system: more energy efficient than traditional design, for the purpose of optimizing the combustion efficiency of the boiler , environmental protection and emission reduction
Plant of 1200 square meters, 100+ production staff, to meet customer demand for urgent orders
With an annual output of 5,000 units, the production capacity is higher than peers, and it can meet the needs of large orders at any time.
Complete equipment, the introduction of domestic and foreign equipment production lines, fully automated production
Free customized solutions , more suitable product recommendations
According to the actual situation of customers, provide on- site guidance and installation services to make the product operate normally
24-hour online customer service, timely collect and feedback customer questions , answer questions
Xi'an Ranxin Thermal Energy Engineering Technology Co., Ltd., located in Xi'an, is a high-tech company engaged in the design, development, production, sales, installation and commissioning of electronic ignition equipment, flame detection equipment, and automatic control systems for ignition and combustion processes .