1 power 1 # battery 3
2 Configuration gas: pulse explosion-proof gas cylinder
3 Flame energy: adjustable
4 Adapted fuel: gas, light oil, heavy oil
1 Electron gun diameter φ38mm length 370mm
2 The length of the ignition rod is to be determined according to the needs of the user.
1. Before use, unscrew the battery cover of the electronic compartment, and insert 3 1 # batteries into the electronic compartment according to the polarity, with the positive side of the battery inward, and tighten the battery cover.
2. Install the gas cylinder on the bayonet of the control valve. Pay special attention to the knob of the control valve in the direction of "one" before installing the gas cylinder to avoid air leakage. Cylinder installation method: first snap the outer ring of the front end of the cylinder into the protruding port on the upper part of the valve frame, and then align the notch on the outer ring of the front end of the cylinder with the protruding port on the bottom of the valve frame After the cylinder is compressed, tighten it clockwise again to make the cylinder installation reliable.
3 Check that the gas cylinder is installed reliably before use. Align the nozzle of the ignition gun with the ignition site. First turn on the power switch, the switch indicator light is on, press and hold the button to hear the sound of fire, then adjust the control valve knob slowly to the "+" direction. After igniting the ignition gun flame, release the button switch and turn off the power. The size of the flame of the ignition gun nozzle can be adjusted by the adjusting valve knob. When the fuel being ignited is ignited, the control valve is closed and the ignition gun flame is extinguished. (Note: After the control valve is tightly closed, the flame will continue for a period of time and slowly go out because of the remaining air in the gun.)
4 After use, remove the cylinder and store it safely. If not used for a long time, the battery should be removed and stored separately.
1 When the ignition gun is used and transported, it should be prevented from vibration. Handle it gently to avoid damage.
2 The battery of the ignition gun is a high-quality 1 # battery. When the battery is used for a period of time, the power is insufficient, which affects the ignition. It should be replaced with a new battery in time.
3 The gas cylinder of the ignition gun is a standard pulse explosion-proof gas cylinder. After the gas of the gas cylinder is used up, the gas cylinder can be allocated according to the standard. If the user has difficulty in purchasing the gas cylinder, please contact our company and the company can provide it at a preferential price.
Ignition equipment: up to 100% ignition success rate , can withstand high temperature of 1300 ℃, more stable performance
Fire detection equipment: research and development process to improve the reliability of equipment operation and the accuracy of detection to ensure the safety of operations
Combustion control system: more energy efficient than traditional design, for the purpose of optimizing the combustion efficiency of the boiler , environmental protection and emission reduction
Plant of 1200 square meters, 100+ production staff, to meet customer demand for urgent orders
With an annual output of 5,000 units, the production capacity is higher than peers, and it can meet the needs of large orders at any time.
Complete equipment, the introduction of domestic and foreign equipment production lines, fully automated production
Free customized solutions , more suitable product recommendations
According to the actual situation of customers, provide on- site guidance and installation services to make the product operate normally
24-hour online customer service, timely collect and feedback customer questions , answer questions
Xi'an Ranxin Thermal Energy Engineering Technology Co., Ltd., located in Xi'an, is a high-tech company engaged in the design, development, production, sales, installation and commissioning of electronic ignition equipment, flame detection equipment, and automatic control systems for ignition and combustion processes .